How to Measure a Rail Drawer by Yourself and Make no Mistakes?

Do you want to install a rail drawer without making any mistakes? Measuring a rail drawer is important so that your cabinet will function properly. Unfortunately, it can be tricky to get the measurements just right. However, measuring a rail drawer by yourself is not rocket science. With these simple tips, you can be sure to measure your rail drawer correctly without making a mistake.

1. Identify The Smallest Unit of Measurement

When measuring a rail drawer, it is important to identify the smallest unit of measurement that you need to use. This is because small errors can add up quickly, resulting in an inaccurate measurement.

For instance, if you are measuring the width of a drawer, you may only need to use quarter-inch increments. However, if you are measuring the depth of the drawer, you may need to use half-inch or even one-inch increments

By identifying the smallest unit of measurement you need to use, you can ensure that your measurements are as accurate as possible.

2. Decide What Size Rail Drawer You Want

Before measuring a rail drawer, you’ll need to determine the size you need. There are two main types of rail drawers – full extension and half extension. Full extension drawers extend out of the cabinet, while half extension drawers only extend part of the way. However, depending on the available space and the items you’ll be storing in the drawer, you may want a different size.

3. Measure The Width of Your Cabinet

Once you’ve decided on the size, you’ll need to measure the inside width of your cabinet. This is the measurement from one side of the cabinet to the other, not including the door. It will give you a good starting point for deciding how large or small your new cabinets should be. To get an accurate measurement, take a tape measure and stand at one end of the cabinet. Then, extend the tape measure to the other side of the cabinet and make a note of the measurement.

4. Measure The Depth of Your Cabinet

When measuring for cabinet drawer rails, it is important to determine the length you need. This is the measurement from front to back, not including the door. Most long drawer rails come in standard lengths, such as 18 inches, 24 inches, 30 inches, and 36 inches. However, some may be slightly shorter or longer. If unsure of the length you need, it is best to measure the inside of your cabinet to be sure. The easiest way to do this is to measure from the front of the cabinet to the back.

5. Measure The Height of Your Cabinet

When measuring a rail drawer, it is important to consider the height of your cabinet. Otherwise, you may end up with a drawer that is either too small or too large for the space. The easiest way to do this is to measure from the top of the cabinet to the bottom. It will give you the full height of the cabinet, and you can subtract the thickness of the door to get the usable height. Once you have this measurement, you can choose a drawer that is the appropriate size. Just be sure to leave enough clearance for the door to open and close without hitting the drawer.

Once you have determined the length and width of the space, you can then begin to mark off increments on the rail drawer. Start at one corner of the space and make a small mark for each inch you measure. As you move along the rail drawer, keep your marks consistent, so they line up correctly. Once you have reached the other side of the space, count the number of marks you have made. It will give you the final measurement for the space.

Last Words

Now that you have all the information you need to measure a rail drawer, it’s time to put it into practice. Remember to take your time and measure twice before you cut or drill any holes. Then, with a little patience and attention to detail, you’ll be sure to get a perfect fit.