How to replace the cabin air filter : Mitsubishi Lancer 2007-2008-2009-2010-2011-2012-2013-2014-2015.

 

Click Here to Find a Repair Manual for Your Car!

(Available for Most Makes and Models)

 

This video will show you step by step instructions on how to replace the cabin air filter on a Mitsubishi Lancer 2007-2015.

Instructions:

1- Open the glove box.
The glove box is held up by two stoppers with one on each side of the glove box.
2- Push both sides of the glove box inward and pull down.
3- Unclip the retaining arm by gently prying sideways.
4- To remove the cabin air filter cover, lift the fastener on the right side of the cover and then pull it straight off.
5- Slide the old cabin air filter out.
6- Slide the new cabin air filter back in with the airflow direction indicator arrow pointing down.
7- Line up the cabin air filter cover and push it into place until the fastener makes a “click” sound.
8- Lift the glove box until the stoppers are back to their original place.
9- Replace the retaining arm by pushing it back in place.
10- DONE!!! 😀

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content.

For more oil reset and DIY maintenance tutorials, make sure to subscribe to our channel!

If you didn’t find what you were looking for, send us a message with the model and year of your car and we will get back to you shortly with the best answer we can find.

 

For any question or suggestion, post a comment below or send us an email to: [email protected]