How to reset oil life: Subaru XV Crosstrek 2013, 2014, 2015.

 

Click Here to Find a Shop Manual for Your Car!

(Available for Most Makes and Models)

 

This video will show you step by step instructions on how to reset your oil life indicator on a Subaru XV Crosstrek 2013 – 2015.

Instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the controls on the left-hand side of the steering wheel, pull the i/Set button towards you to bring up the selection screen.
3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
7.DONE!!! 😀
*Reset only available on models with the multi-information display

If you liked this video and found it helpful feel free to like, share, and comment to help us bring even better content.
For more oil reset and DIY maintenance tutorials, make sure to subscribe to our channel!

If you didn’t find what you were looking for, send us a message with the model and year of your car and we will get back to you shortly with the best answer we can find.

 

For any question or suggestion, post a comment below or send us an email to:
[email protected]